Dammar recin solution 1:2
64,00 kr exkl moms 231,00 kr exkl momsPrice range: 64,00 kr exkl moms through 231,00 kr exkl moms
Dammar recin is a collective name for various resins from trees belonging to the family Dipterocarpaceae that grows in Southeast Asia.
Our product consists of selected bright and clean pieces. Dammar recin dissolved in turpentine gives a varnish that for many hundreds of years has been used as a medium for oil paints to increase the gloss and to varnish oil paint.
Safety sheet
SÄKERHETSDATABLAD
Related products
Le Tonkinois Vernis Oil varnish
Quick View
High-gloss lacquer that gives a durable surface. Le Tonkinois Vernis is a traditional french oil varnish that provide outstanding and lasting protection to wood and metal.
The varnish follows the wood's movements during temperature- and humidity changes. Provides superb protection against hard wear on e.g floors.
Product sheet
SÄKERHETSDATABLAD
Dammar recin 1kg
Quick View
Dammar recin is a collective name for various resins from trees belonging to the family Dipterocarpaceae that grows in Southeast Asia.
Our product consists of selected bright and clean pieces. Dammar recin dissolved in turpentine gives a varnish that for many hundreds of years has been used as a medium for oil paints to increase the gloss and to varnish oil paint.
Le Tonkinois Gelomat
Quick View
Matting agent for Le Tonkinois Vernis Oil varnish. Add between 20-45% by volume to achieve gloss from silk matt to full matt.
Product sheet
SÄKERHETSDATABLAD
Linseed oil varnish
Quick View
Modification of the final coat. When painting indoors higher demands are made concerning the finish and surface. To obtain a higher gloss finish and better coverage of our linseed oil paint, Ottosson Linseed oil varnish can be added. The mixture should be between 0.5- 1.5 dl litre. The mixture should only be applied to the paint for the final coat.
Bio Impression oil varinsh
Quick View
Bio Impression: is a deep-penetrating, fast-drying and moisture-protecting natural oil varnish consisting of linseed oil, castor oil, palm oil, lemon oil and aloe. It has an excellent adhesion to all hard resinous and greasy woods.
The wooden surfaces should be clean and grease-free, preferable the surface should be freshly sanded. The moisture content of the wood must not exceed 14%. Bio Impression is applied to at least 2 layers indoors and 3-5 layers outdoors.
Surface treatment with Bio Impression for semi-matte appearance (silk gloss): To obtain an "oily appearance" apply Bio Impression fluently with a Scotch-Brite sponge. Let the oil soak in for 15-20 minutes. Make sure that the entire surface is kept "wet" during this time. Then wipre the surface off so that all shiny stains disappear. The next layer is applied after 8 hours. Wiping can then be done after 1-5 minutes. If the surface is exposed to sun and rain, repeat this procedure 5-10 times. Indoors 1-4 layers are sufficient at normal moisture load. If the result is too shiny, a smaller area can be matterd with a Scotch-Brite after 6-8 hours.
Maintenance: Surfaces treated as above are checked annually. If the surface begings to dull or gray, sand with a sanding cloth or wash with an effective cleaning agent with a proper rinse. Then apply 2 coats of Bio Impression. Exposed surfaces that have been treated with less than 3 layers must be supplied with new oil within 1-2 years. Surfaces painted with Linseed Oil Paint can be maintained with Bio Impression. The paint retains surface and gloss for a longer time with this "varnish". We recommend a thin coat at each maintenance occasion.